Hello , so when I run any sketch with default settings I get message to get a license.
I go to website input board id and get a license
on all sketches when i replace the uint32_t license[4] = with my license I immediately have erors
Can someon help ? I event tried to download 0.0.7 that Mcu.init() takes no args but i get other error with include not found
18:02:43.793 -> [ 3][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz 18:02:43.827 -> ESP32ChipID=389B99842178 18:02:43.906 -> ESP32 MCU init... 18:02:43.906 -> 18:02:43.906 -> abort() was called at PC 0x400826ba on core 1 18:02:43.906 -> Backtrace:0x40083dd5:0x3ffb26500x4008c7b1:0x3ffb2670 0x40091ae1:0x3ffb2690 0x400826ba:0x3ffb2710 0x40082c90:0x3ffb2760 0x400d3788:0x3ffb2780 0x400d3f19:0x3ffb27a0 0x400d3325:0x3ffb27e0 0x400dc926:0x3ffb2820 18:02:43.950 -> ELF file SHA256: 0000000000000000 18:02:43.950 -> Rebooting...
