WiFi Kit 32 is rebooting (solved)

I already had an ARDUINO IDE running and loaded the environment for the Heltec board as in the instructions.

Unfortunately, I can not load a sketch, nor any of the examples, without my board constantly restarting.

See the Serial output

ets Jun 8 2016 00:22:57

configsip: 0, SPIWP:0xee
mode:DIO, clock div:1
entry 0x400806a4
ets Jun 8 2016 00:22:57

I had that problem last week and it turned out I had the wrong board chosen.


@Joshua had given the right answer. Correctly install our development framework and choose the right board. You can refer to this page:

Hello and many thanks,
Indeed i mixed up the Boards “Wirless Stick” and “Wifi Kit 32”.
Problem solved.