[SOLVED]Radio in continuous wave transmission mode

LoraCube · March 20, 2020, 10:36am

i’m looking for example which can sets the cube cell’s semtech radio in continuous wave transmission mode through AT command and without AT command, any idea where can i find it?

Supporter · March 11, 2020, 8:07am

AT command don’t have continuous wave transmission mode.

Supporter · March 19, 2020, 5:17am

Anyway, you can send continuous wave via this example:

github.com

HelTecAutomation/ASR650x-Arduino/blob/master/libraries/LoRa/examples/LoRaBasic/TxPowerTest/TxPowerTest.ino

#include "radio.h"
#include "Arduino.h"

#define RF_FREQUENCY                                868000000 // Hz
#define TX_OUTPUT_POWER                             20        // 20 dBm
#define TX_TIMEOUT                                  10        // seconds (MAX value)
static RadioEvents_t RadioEvents;

void OnRadioTxTimeout( void )
{
    // Restarts continuous wave transmission when timeout expires
    Radio.SetTxContinuousWave( RF_FREQUENCY, TX_OUTPUT_POWER, TX_TIMEOUT );
}
void setup() {
  boardInitMcu();
  // put your setup code here, to run once:
  RadioEvents.TxTimeout = OnRadioTxTimeout;
  Radio.Init( &RadioEvents );

  Radio.SetTxContinuousWave( RF_FREQUENCY, TX_OUTPUT_POWER, TX_TIMEOUT );

This file has been truncated. show original

LoraCube · March 20, 2020, 10:25am

code is working for me thank you