Hello all- I have 4 WiFi Lora (V3) boards presently ping-ponging each other with Lora messages on the bench. I recently registered a Seeed Studio M2 SenseCAP multi-function gateway with The Things Network. I have reached a point where I now want to register the HelTec V3 devices within a TTN application. V3 devices are not natively supported in TTN. Any thoughts RE how best to manually provision the V3 boards within The Things Network? What parameters should be entered when using manual provisioning? Thanks in advance.
Registering HELTEC WiFi Lora (V3) Devices in The Things Network
Just configure it the same as V2.