Looking for the lasted firmware for Capsule Sens V3

#1

I have flashed this firmware and it worked but Mestastic app warns that this is old software now. Is there a newer software that does not trigger this warning?
https://docs.heltec.org/en/node/esp32/capsule_sensor_v3/index.html#meshtastic

Also: Firmware from this link:
https://resource.heltec.cn/download/Heltec%20Capsule%20Sensor%20V3/Meshtastic%20Firmware
Will not load and causes this error:
Server closed the connection abruptly!

Anyone found new firmware for this device that loads?

When in flash mode for this device one thing that is missing is the firmware version info.
All that is listed is the file size and flashed date. Makes it hard to now what was loaded.

#2

You can find the latest firmware for the capsule in this link.

#3

Thank you Ashley.
New resource for me. :slight_smile:

#4

I have loaded the .bin file and it does not function properly.
File used:
firmware-heltec_capsule_sensor_v3-2.5.21.1c8eb7e.bin
Listed as 1,822KB

Erased loaded firmware
Changes name of above 2.5.21 **** file to:
Firmware.bin
Loaded firmware without issue.
Clicked on Run but no pop-up window showed.
Turned off device by holding button
Turned on unit with short press but no flashing light.

Repeated above three times. Same problems.
Then followed the above procedure to load old firmware.
Clicked run and window did pop-up as normal.

Meshtastic web client presents notice of out of date software.

Thanks

P.S.
Injustice tried version 2.3.22 with the same results except after flashing and then clicking on the RUN icon the pop-up window did show.
But after turning off and turning back on no flashing LED.