Hi,
I am trying connect Heltec lora 32 v2 with rak wireless edge 2 using example sketch of Heltec Automation LoRaWAN communication example. It is showing me joining but cannot proceed further than this.
10:48:07.982 -> joining…
10:48:07.982 -> [138824][E][esp32-hal-gpio.c:166] __digitalWrite(): IO 0 is not set as GPIO.
10:48:07.982 -> [138832][E][esp32-hal-gpio.c:166] __digitalWrite(): IO 0 is not set as GPIO.
