Heltec LoRa V3 License

[aps]

Dear all, I am in need of a little assistance.

I am having a small problem, and it is somehow affecting LoRa transmission rates, does anyone have any advice

Here is the serial output:

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x29 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x43c
load:0x403c9700,len:0xbec
load:0x403cc700,len:0x2a3c
SHA-256 comparison failed:
Calculated: dcde8d8a4817d9bf5d5d69a7247667264e4e10ac7493514868b61f5aa6146539
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway…
entry 0x403c98d8

Many thanks for all the help in advance, APS.

[UniquePete]

This appears to be the problem reported here:

[solved] WSL V3: A fatal error occurred: Failed to connect to ESP32-S3: Wrong boot mode detected (0x14)

Doing that, I get the following on the serial monitor before it goes back to run the previously loaded program 08:50:57.818 -> ......ESP-ROM:esp32s3-20210327 08:50:59.629 -> Build:Mar 27 2021 08:50:59.629 -> rst:0x1 (POWERON),boot:0x14 (SPI_FLASH_BOOT) 08:50:59.629 -> SPIWP:0xee 08:50:59.629 -> mode:DIO, clock div:1 08:50:59.671 -> load:0x3fce3808,len:0x43c 08:50:59.671 -> load:0x403c9700,len:0xbec 08:50:59.671 -> load:0x403cc700,len:0x2a3c 08:50:59.671 -> SHA-256 comparison failed: 08:50:59.67…

See how you go working through the discussion in that thread.